What causes the temperature of the diamond track drill to be too high?

What exactly is the cause?Diamond track drilling rigWhat about the temperature? There are two reasons why the rig temperature is too high: the oil temperature is too high, and the water temperature is too high. Let's talk about these two situations together.

Diamond track drill hydraulic oil temperature is too high:

First of all, the hydraulic oil temperature is too high, according to the basic theory of hydraulic sand and in recent years, the key reason for the hydraulic oil temperature is too high heat production and heat dissipation is too slow. Hydraulic pump into the oil pipeline and hydraulic tank sealing is not in place, the oil filter blocking, hydraulic system pipeline is not smooth, hydraulic pump leakage will make hydraulic oil caused by large quantities of heat and then make the hydraulic oil temperature due to heat and rapid rise.

Hydraulic oil radiator inside the channel is blocked, radiator outside gray is too large, the wind is not enough, hydraulic oil has not passed through the hydraulic oil radiator and other reasons can cause hydraulic oil because the heat dissipation is too slow and high temperature.

Diamond track drill engine water temperature is too high:

Next, we talk about the phenomenon of high water temperature of the engine of diamond track drilling rig. The ignition timing is not accurate, the engine power is not enough, the cooling system abnormal will cause the engine water temperature is too high. On the drilling rig before the diesel engine with the common rail electric spray, because the hydraulic oil radiator is installed in the upstream of the cooling air in the water tank, so the hydraulic oil overheating will also cause the water temperature to be too high and then several cases to show.

In addition, the engine crankshaft deformation, crankshaft gap is too small will also be caused by the engine itself excessive power consumption and high temperature, hydraulic variable control system ineffective will also cause the engine water temperature is too high.

Diamond track drilling rig temperature is too high is the above point of view of these reasons, you can pay attention to the application on weekdays.